westway asphalt
Resurfacing · London

Asphalt and driveway resurfacing in London

If the base underneath is still sound, a new asphalt surface course gives you a like-new driveway, car park or access road for a fraction of the cost of rebuilding it. We check the base first, then repair, plane where needed and lay.

Resurfaced car park with fresh asphalt and yellow bay markings
Car park resurfaced with new bay markings, Basingstoke.

Get a free quote

Step 1 of 3
What needs surfacing?
  • £10m public liability insurance
  • Our own hand-lay and machine-lay crews
  • CSCS-carded team
  • 40 years in the trade
Before you start

Can your surface be resurfaced?

Resurfacing only works on a solid base. These are the signs we look for at the survey.

Surface wear

The top has gone grey and loose stone is coming away, but the driveway hasn't sunk anywhere.

Fine cracking

Hairline cracks across the surface, with no dips or movement either side.

A few potholes

Isolated holes in an otherwise solid surface. We cut these out and repair them before resurfacing.

Dips, ruts or wide cracks

These mean the base underneath has failed. A new top layer won't fix it, and the whole driveway needs digging out.

Options

Overlay, inlay or full reconstruction

There are three ways to renew an asphalt surface. We recommend the one your base and levels actually need, not the most expensive.

Overlay

A new surface course laid straight over the old one, once it is cleaned, repaired and sprayed with a bond coat. It is the quickest and cheapest option, but it raises the level by 25 to 40 mm.

Inlay

We plane off the worn top layer first, then lay the new surface at the same level. This is right next to doors, garages, kerbs and drains, where the level can't go up.

Full reconstruction

Dig out the surface and base, then rebuild from a new sub-base up. It is needed where the base has failed: dips, ruts, wide cracks or standing water.

The process

How we resurface a driveway or car park

Most of the work is in the preparation. A new layer is only as good as the bond to what is underneath it.

  • Survey: we check the base for movement and measure levels at doors, kerbs and drains
  • Repairs: potholes and failed patches cut out square and relaid
  • Preparation: the surface swept clean, and planed where the level must stay the same
  • Ironwork: drain covers and gullies raised to the new level
  • Bond coat: a bitumen emulsion sprayed on so the new layer sticks to the old
  • New surface course: laid hot, rolled, with joints and edges sealed
Commercial

Resurfacing car parks and access roads

For car parks, private roads and yards we machine-lay with a paver for an even finish across large areas. We phase the work so the site stays open, and can re-mark bays, arrows and hatching once the new surface is down.

Paver machine-laying a new asphalt surface on a service road in Dartford

Machine-lay resurfacing on a service road, Dartford.

Costs

Asphalt resurfacing costs

Resurfacing costs less than a new driveway because there is no dig-out or new sub-base. What moves the price:

  • The area, and whether it is hand-laid or machine-laid
  • How many repairs are needed first
  • Planing to keep levels at doors, kerbs and drains
  • Ironwork to raise
  • Line marking afterwards, on car parks
How it works

From first call to fresh surface

01

Tell us about the job

Takes a minute online, or call us. Photos help if you have them.

02

We visit and measure

We check levels, drainage and what is underneath before we price anything.

03

You get a written quote

Itemised, showing the area, the build-up and what is included.

04

We lay it

Dig-out, sub-base, binder and surface course, rolled and edged. Then we clear the site.

Start with step one
Recent work

Recent resurfacing work

Questions

Resurfacing questions

Can you resurface over my existing tarmac driveway?

Yes, if the base is sound. Where the surface is only worn or finely cracked, a new surface course over the top works well. Where the driveway has dips, ruts or wide cracks, the base has failed and it needs a full dig-out.

Will resurfacing raise my driveway?

An overlay raises it by 25 to 40 mm. That is fine in open areas, but next to a door, garage or air brick we plane the old surface off first so the level stays the same. Ground level should stay at least 150 mm below the damp-proof course.

Can you lay tarmac over block paving or concrete?

Not over block paving: the blocks move and the new surface cracks. Over concrete it can work with the right preparation, but the joints in the slab can show through as cracks over time. We will tell you honestly which applies.

How long does resurfacing take?

Most driveways are resurfaced in a day once repairs are done. Car parks and access roads are planned in sections so the site can stay open.

Do I need planning permission to resurface a front driveway?

Replacing the surface of a front driveway over 5 square metres falls under the same drainage rule as a new one. We keep the falls running to your own land, or use porous asphalt, so no application is needed.

Is resurfacing cheaper than a new driveway?

Yes, usually by a good margin, because there is no dig-out or new sub-base. It only makes sense if the base is sound, so we check that first.

Areas

Resurfacing across London

We resurface driveways, car parks and private roads in every London borough.

All areas

Related services

Get a price for resurfacing

Tell us what needs resurfacing and where. We will check the base and send you a written quote.

Get my free quote
Get a free quote