Tarmac and asphalt surfacing in Richmond
We lay porous asphalt driveways, resurface private roads and shared drives, and surface car parks and court bases across the London Borough of Richmond upon Thames, from Barnes to Hampton.

- £10m public liability insurance
- Our own hand-lay and machine-lay crews
- CSCS-carded team
- 40 years in the trade
Areas and postcodes we cover in Richmond
Both sides of the river, including:
Surfacing for Richmond homes, roads and sites
Richmond is mostly residential, with high standards for how streets look. That shapes what we lay here.
Private roads and shared drives
Richmond has many private roads, mews and shared drives serving several houses. We resurface them with one quote for everyone on the road, as we did for the new-build lane in the photo above.
Porous driveways
The council asks for permeable surfacing on front gardens, so most driveways we lay here are porous asphalt on an open-graded stone base, with planting and the boundary kept.
Larger homes and estates
Longer drives and turning areas in Hampton, Teddington and Ham, where machine-laying gives an even finish.
Schools, clubs and commercial sites
Car parks, paths and court bases for the borough's schools, sports clubs and businesses.
Richmond front garden parking rules
Almost every front garden conversion in Richmond needs highways consent for a crossover, whether or not it needs planning permission. These are the main points from the council's highways authority requirements, updated in 2023 and 2024.
We plan the driveway around them before you apply, so you are not paying for work that won't be approved.
| Parking space | At least 2.4 m wide by 4.8 m long, with a further 2.4 m of width, and not in front of the main door |
|---|---|
| Surface | Permeable sub-base and surface, laid to a slight fall, with a drain at the boundary if needed so no water reaches the pavement |
| Materials | Asphalt and concrete to be avoided where possible; traditional materials preferred near listed buildings and in conservation areas |
| Front garden | Not paved over completely, with planting encouraged |
| Boundary | At least a third of the front wall or fence kept; anything over 1 m next to the road needs planning permission |
| Street trees | The crossover kept clear by four times the tree's circumference |
| Crossover width | 2.4 m for a single crossover, built by the council at the owner's cost |
Summary of Richmond Council's highways authority requirements (November 2023, revised 2024). Check the current version before applying.
Porous asphalt driveways in Richmond
Richmond asks for the sub-base and surface of a front garden parking space to be permeable, laid to a slight fall, with a drain at the boundary if needed so no water reaches the pavement. Its permeable paving guidance asks for an open-graded Type 3 sub-base with at least 30% voids.
Porous asphalt laid on that kind of base meets the drainage side. We keep part of the garden planted and part of the boundary in place, as the council asks.
Private roads and shared drives in Richmond
For residents' associations and management companies, we resurface private roads with one written quote, work in halves so people can get in and out, and put kerbs, ironwork and drainage right at the same time.
Private and estate roads
From first call to fresh surface
Tell us about the job
Takes a minute online, or call us. Photos help if you have them.
We visit and measure
We check levels, drainage and what is underneath before we price anything.
You get a written quote
Itemised, showing the area, the build-up and what is included.
We lay it
Dig-out, sub-base, binder and surface course, rolled and edged. Then we clear the site.
Richmond driveway and surfacing questions
Can I have a tarmac driveway in Richmond?
Richmond's guidance asks for a permeable surface and base, and to avoid asphalt and concrete on front gardens where possible. Porous asphalt is permeable and suits some properties, while others call for gravel, setts or block. We will tell you honestly which is likely to be approved for your house.
How big does my front garden need to be?
The council's highways requirements set the parking space at a minimum of 2.4 m wide and 4.8 m long, with a further 2.4 m of width, and it should not be in front of your main door. We measure this at the survey.
Who builds the dropped kerb in Richmond?
The council, as highway authority, builds the crossover at the owner's cost once it is approved. You pay the application fee and then the construction cost. We lay the driveway to meet it.
Do I need planning permission in a conservation area?
Walls, fences and railings over 1 m next to the road need permission, and demolishing structures over 115 m³ needs consent in a conservation area. Parking in front gardens is treated as especially sensitive near listed buildings and in conservation areas.
What about the tree outside my house?
Richmond keeps crossovers away from street trees by four times the tree's circumference. The council's tree officers have to be consulted before any work that affects a tree.
Can you resurface our private road in Richmond?
Yes. We give one quote for the whole road, work in sections so residents can get in and out, and can add humps or markings at the same time.
We also cover
Get a price for your job in Richmond
Tell us your postcode and what needs surfacing. We will visit, check it against the council's rules and send a written quote.