westway asphalt
Guide · Dropped kerbs

How to get a dropped kerb in London

By Peter Priest, Director, Westway Asphalt · Updated

Short answer

Apply to your council's highways team. They check that your front garden fits a car without it overhanging the pavement, usually a space of at least 2.4 m by 4.8 m, then quote for their own contractor to build it. You pay an application fee and the building cost, and lay the driveway yourself.

What a dropped kerb is

A dropped kerb, which councils call a vehicle crossover, is a lowered section of kerb and a strengthened stretch of pavement that lets you drive from the road onto your property. You need one to park in your front garden. It is built and owned by the council, even though you pay for it.

How to get one, step by step

  • Measure your front garden. Every council has a minimum parking space, usually around 2.4 m wide by 4.8 m deep, at right angles to the road
  • Check whether you need planning permission first, for example on a classified road, for a flat, or in an Article 4 conservation area
  • Apply to your council's highways team and pay the application fee, which is normally non-refundable
  • An officer visits, measures and checks visibility, trees, street furniture and parking bays
  • If approved, the council sends a quote for building the crossover. You pay it before work is booked
  • You build the driveway, usually before the council builds the crossover, so the two meet at the right level
  • The council's own contractor builds the crossover across the pavement

Is your front garden big enough?

This is where most applications fail. Councils want the whole car inside your boundary, parked at right angles to the road, so it never overhangs the pavement. Most London boroughs ask for a space of at least 2.4 m by 4.8 m, some want more, and many also want a clear path to your front door and good visibility either side.

Measure from the back of the pavement to the front wall of the house or bay window, at the narrowest point. If it is close, check your council's exact figure before applying.

Rules in different London boroughs

Every London borough is its own highway authority, so the rules differ. These are the main points for the boroughs we cover most, taken from each council's own policy:

BoroughMinimum spaceWorth knowing
Ealing2.4 m frontage, 4.2 m deepTypical crossover about £1,200
Richmond2.4 m by 4.8 m, plus a further 2.4 mPermeable surface expected
Hounslow4.8 m by 2.4 m, plus 1.2 m pathNo loose gravel under 20 mm
Hillingdon2.4 m by 4.8 mBuilt within about 8 weeks of payment
Kingston4.8 m by 2.7 mSlope no steeper than 1 in 12
Hammersmith & Fulham4.8 m by 2.4 m£550 application fee
BromleySee Bromley's 2026 policy£100 fee; deep verges usually refused
Croydon2.4 m by 4.8 m£150 fee; not within 10 m of a junction

Rules and fees change. Check your council's current policy, or see our borough pages for the source.

When you also need planning permission

A dropped kerb is a highways approval, not planning permission. But you may need planning permission as well, and usually first, if:

  • The road is a classified road, or a Transport for London red route
  • The property is a flat, maisonette or HMO, or commercial
  • You are in an Article 4 conservation area, or need to take down a front wall over 1 m high
  • The new driveway is over 5 m², impermeable, and drains onto the road
Planning permission for driveways

Getting the driveway right

Councils check your side of the job too. Most want the driveway built, or approved, before they build the crossover, with no water running onto the pavement, no gates opening outward and no loose gravel spilling onto the footway. The levels have to meet the crossover, which normally falls gently towards the road.

That is the part we do: we measure the space against your council's rules before you apply, design the falls and drainage, lay the driveway, and set the levels so the council's crossover meets it cleanly.

Questions

How much does a dropped kerb cost in London?

There are two costs: the council's application fee, which ranges from about £100 to £550 across the boroughs we cover, and the cost of building the crossover, which the council quotes after its site visit. Ealing, for example, puts a typical crossover at about £1,200.

Can I use my own builder to drop the kerb?

No. The pavement is public highway, so only the council or its appointed contractor can build a crossover. Anyone offering to do it for you is doing it illegally, and Croydon Council, for one, warns residents about this.

How long does it take?

It varies by council. Hillingdon aims to reply within 10 to 15 working days and build within about 8 weeks of payment; Hammersmith & Fulham consults the utility companies first, which takes around six weeks on average.

Can I park across the pavement without a dropped kerb?

No. Driving over the pavement without a crossover is illegal and damages the footway and the pipes and cables under it.

What if my front garden is too small?

Most councils refuse a crossover if a parked car would overhang the pavement. We measure before you apply, so you don't lose the application fee on a garden that won't qualify.

Planning a driveway with a dropped kerb?

We measure your front garden against your council's rules before you apply, then lay the driveway to meet the crossover.

Get my free quote
Get a free quote